16
CHARGING THE BATTERY
Before using your Ukiah Co. audio system, follow steps on page
13 to fully charge the lithium-ion battery. [Figure 9]
PAIRING TO A Bluetooth® DEVICE
1. Turn your Bluetooth® device OFF entirely and then turn it back
ON to refresh the device’s Bluetooth® memory.
2. Find the Bluetooth® menu in your device and make sure the
Bluetooth® function is turned ON (refer to your device’s user
manual for instructions on finding the Bluetooth® menu).
3. Turn your Ukiah Co. product ON using the ON / OFF SWITCH.
The audio system will say “waiting for connection”. [Figure 10]
4. On your device, perform a Bluetooth® “device discovery” to
add “UKIAH” as a new device.
5. When the speaker is discovered your device will display
“UKIAH” in the Bluetooth® menu.
6. When your device is connected, the audio system will say
“connected”.
• NOTE: Keep the Bluetooth® function on your device ON, to
ensure the speaker can automatically pair with your device the
next time the audio system is turned ON.
PLAYING MUSIC
After successfully pairing the unit with your Bluetooth® device,
you can begin playing music or any audio through your device’s
menu system (refer to your device user manual for instruction on
playing music).
ADJUSTING THE VOLUME
The speaker volume can be adjusted by turning the volume
control knob located on the front of the unit, or directly on your
Bluetooth® device. [Figure 11]
WARNING: Playing music at high volumes can damage
hearing.
USING THE SPEAKER FOR HANDS-FREE PHONE CALLS
Once your smart-phone has successfully paired with your Ukiah
Co. product, you can use the speaker and built-in microphone for
hands-free calls.
NOTE: The MIC is located on the front of the unit just below
the volume control knob. For best call quality remain near the
product.
[Figure 9] - Audio battery charging port.
[Figure 10] - Audio system power button.
[Figure 11] - Audio volume control knob.
AUDIO SYSTEM
