ujk technology 717127, Оригинальное руководство пользователя

Страница: 17 / 40

Assembly
17
Fig 13
Secure the end of the back plate to the lower support
bracket (E) and then turn the stand upright.
E
Rear Wheel Assembly
Step 10 Locate the wheel brackets (b), the four M6 Hex bolt
(c) and M6 washers (e). Lineup the wheel bracket (b) holes
with the threaded holes to the base of the upright support
(A) and secure using two Hex bolts and washers (c and e).
(See fig 14) Repeat for the opposite side, see fig 15.
Fig 14
Fig 15
b
c e
Step 11 Turn over the stand, locate the wheels (a), M8x50
bolts (d), M8 washers (f) and M8 nuts (g). Position the
wheel into the wheel bracket (b), insert a M8 washer two
either side of the wheel and line up the holes. Insert the M8
bolt (d) through the wheel bracket and secure using a M8
nut (g), see figs 16-17.
DO NOT OVERTIGHTEN!
OTHERWISE THE WHEEL WILL
NOT ROTATE FREELY.
Fig 16-17
d
f
b
a
Repeat for the other side see image below.
Continues Over...