UHP-1200 OUTDOOR SATELLITE ROUTER
GENERAL DESCRIPTION AND INSTALLATION GUIDE, v3.2
© UHP Networks Inc. 2015
14
www.uhp.net
Symptoms
Possible reasons
Actions
Transmission of the terminal is not
allowed by Hub (only for TDM/TDMA
terminal)
Contact Hub administrator
Station is not
transmitting
IF Tx cable failure
Check Tx cable and make sure that its connectors
are properly connected to the BUC and the router.
BUC is not powered
Check if BUC power is switched on
Disconnect Tx IF cable from BUC and make sure that
24 VDC is available on the connector.
BUC failure
Replace the BUC on the spare one
Other symptoms
Other reasons
Contact your dealer or service center
In many cases, reinstalling system software allows to restore a satellite router functionality, which may need reset
to the factory default configuration.
If the recovery of software cannot be implemented successfully, or if this operation does not eliminate the defect,
it is necessary to illuminate the faulty device and replace it by new device.
