UHP SCPC MODEM
USER MANUAL, v3.2
© ROMANTIS 2015
15
www.uhp.net
Configuration of synchronization settings;
Set up of automatic transmission level control (TLC);
Activation of Station’s modulator.
2.3.2
Receive and Transmit Configuration
Transmit and Receive configuration should be entered into TDM/SCPC TX and TDM/SCPC RX forms respectively.
Once respective form is configured it should be applied to take effect.
Figure 11 Transmit and Receive Configuration
.
2.3.3
Modulator Settings
Activation of the Station’s modulator and adjustment of its initial power (transmitted carrier level) is performed in
“Modulator
”
section (see Figure 12).
Figure 12 Management of the modulator
Terminal-1
Terminal-2