Uhlenbrock IB-COM, Руководство пользователя

Страница: 28 / 47

IB-COM
28
Also called Gauge 1 Format, with locomotive special functions f1 to
f4.
•
Start “IB_Util.exe”
•
Operate “Connect”
•
Select the “Basic Settings” under the “Settings” menu
•
The window for Basic Settings appears
•
Select the desired locomotive data format “in the roll menu”
•
Input with the button „attitudes take over “confirm
The digital format of each locomotive can be modified independently
of all other locomotives under the “Settings – Locomotive Data
Format individual” menu.
4.3 Settings – Basic Settings “Solenoid Data Format”
Here you configure the data format to be used by solenoid decoders
for all switching addresses before IB-COM is first used.
The DCC or Motorola data format are available. The default is the
DCC data format.
Procedure:
•
Start “IB_Util.exe”
•
Operate “Connect”
•
Select the “Basic Settings” under the “Settings” menu
•
The window for Basic Settings appears
•
Select the desired locomotive data format “in the roll menu”
•
Input with the button „attitudes take over “confirm
Switching decoders in Motorola Format:
Uhlenbrock, Märklin, Viessmann, Modeltreno
Switching decoders in DCC Format:
Uhlenbrock, Roco, Arnold, LGB, Lenz, Märklin=, Digitrax, etc.
Solenoid device decoders from Märklin, Viessmann and Modeltreno
are compatible with the Motorola format. Their addresses are
defined using the DIP switches that can be found inside each unit.
Each decoder is characterized by a unique address.
All Intellibox setup menus make use of these turnout addresses and
not the solenoid decoder address.
The appendix has a table which shows the relationship between the
DIP switch position and the turnout addresses, as well as the
allocation for the Märklin keyboard.
Note
Attention