Uhlenbrock Elektronik GmbH
Mercatorstr.6
D-46244 Bottrop
Made in Germany
These are your advantages
:
Two years warranty
from date of purchase
Service
In case of an eventual failure please return the defective item to us for
repair. Please include purchase proof and a short description of defect,
as well as stating the decoders address setting.
Hotline
In case of questions,we are ready to answer them for you!
Directly contact our technician:
(49) 2045 858327
Mo - Fr except Wed 14:00-16:00 hrs CET, Wed 16:00 - 18:00 hrs CET
The figure 2 at the end of the item no.
means that this article is delivered with
an english discribtion.
Loktool 2.0 for Windows (TM)
contains these features:
Programming of decoders
- comfortable input of all parameters, store in decoder profile
database.
Address search function
- for all decoders using the Märklin-Motorola data format.
Controller screen
- six controllers are shown on a screen display.
Hardware requirements
: A Märklin central unit and 6050/6051 interface connected to a PC.
Programm will run on all PCs from 386-25 on under Win 3.x, 95/98 and NT.
www.uhlenbrock.de
Be it most recent information about Intellibox, a pricelist or a listing of authorized dealers, plus
various publications to download, our website warrants your visit in every case.
Warranty Statement
Every item is fully tested for functioning before shipment. If a defect occurs within two years
after purchase, the item will be repaired free of charge against presentation of purchase proof.
Damages caused by overload or improper treatment are not covered by this warranty.
For EU only
Please note that decoders may only used in models carrying the EC conformance label.
Item no. 75 102
11.01Be
4 033405 751020
Please note
Control by Intellibox or Märklin 6021
A central unit using the extended Motorola data format, such as Intellibox or Märklin 6021, will
call up A1 by pushing the F1 key, and A2 by pushing the F2 key.
The code value of function #05 must be set to 80 in order to use the extended data format. This
is the factory-preset value.
Control by an old Märklin Central Unit
Only A1 is toggled on/off with each push of the off key.
The code value of function #05 must be set to 01 in order to use the old data format.
Remote uncoupling (telex) in analog mode
When the code value of function #05 is set to 02 or 03, the decoder will work as a normal reverser
plus telex if set to analog operation.