Ugur UDD 45 DTK, Руководство по эксплуатации

Страница: 17 / 28

User Manual |
17
EN
D- USING YOUR PRODUCT
Start-up
WARNING!
• This operating manual applies for various device models. Hardware scopes of the models may vary.
There may be differences in the pictures.
• Clean inside and all accessories of your product before the first start up.
• If your product has been shaken so much during the transportation and positioning, wait for one (1)
hour without running it. Thus, the compressor oil, which may enter into the system, will return back.
You may damage the compressor if you run it without considering this.
• Insert your product’s plug into an outlet with alternative current of 220-240V/ 50-60 Hz, 110-127/60 Hz
only, which has been installed according to the regulations (Picture 11).
• You will hear a slight sound from the compressor when your product is running.
• The fan inside your product will stop once you open the door of your cabinet.
• If the lights of your product do not light, put the 0-1 switch under the canopy to position 1 (Picture
12-13).
PICTURE 11
PICTURE 12 PICTURE 13