Page 15
47200 Instruction Manual (Rev. 1)
4.5
Configure Menu
When
Configure
is selected from the
Main Menu
,
the following screen is shown:
The Configure menu allows the user to adjust a number of configuration settings in GSM;
these include options related to the measurement process, such as whether the
measurement is ended automatically by removing the applied force or manually by press-
ing the foot trigger switch, but also covers more general settings such as the display
brightness setting time and date, etc.
For each configuration option, it is possible to
Go to the
Next
option
Change
the configuration
Exit
from the Configuration Menu.
The current value is either indicated in the third line
(as in the above example, 120gf/s), or marked by
the underlining, as in this screen, where “force lvl” is
the selected option.
Select the correct option, adjust if necessary, go to the next, or press Exit.
When
Exit
is pressed, you will be asked whether to
save the changes to configuration, or not.
4.5.1
Configure Menu Options
The
Configure
menu consists of
14 screens
by which the user may adjust the following
features of GSM.
The factory
default settings
are shown in the brackets, in red color:
1
1
.
.
Adjust the
target force rate
, which is the ideal rate at which the stimulus force
should be applied
(
120gf/s
).
Note that this setting also has an influence on the
rate-meter control and the PC slope function (see
paragraphs 5.4 and 0)
2
2
.
.
Showing force
rate-mete
r or
text
during tests
(
Text
)
. See paragraph 5.4
3
3
.
.
How the measurement is
ended
: force level or foot pedal switch (
Force level
)
4
4
.
.
Make a
warning noise
if a preset force is exceeded (
None
)
