UGO BASILE 47200, Инструкция по эксплуатации

Страница: 17 / 39

Page 11
47200 Instruction Manual (Rev. 1)
4.4 Measure Menu
When Measure is selected from the Main Menu ,
the following window appears for a few seconds,
showing:


The force range


The transducer serial number
The available force ranges (see paragraph 4.4.4-Change Max Force) are


0-100gf


0-500gf
 
0-1500gf
GSM will then automatically complete an Autozero routine:
IMPORTANT:
Do not apply force during the Auto-
zeroing phase.
Then the initial screen of the Measure menu will then be displayed:
The Measure menu consists of 6 options, which will
be described in details in the next paragraphs:


Measure Peak Force, see paragraph 4.4.1


View Acquired Data, see 4.4.2
 
Transfer Data to PC, see 4.4.3


Change Max Force, see 4.4.4


Memory Status, see 4.4.5
 
Erase Memory, see 0
The user steps through the available options by pressing Next option and then selects
the required option by pressing Select this .
Please note that the descriptions given below assume the factory default
values for the configuration settings.
The effects of altering these settings will be discussed later.
4.4.1 Measure Peak Force
In the Measure Peak Force menu shown before,
press View config to view the configuration under
use, as shown in the example below.