UFO Quasar UFOQUA2790-A, Руководство пользователя, Страница: 20 / 28

OPERATION
QUASAR USER GUIDE
20
1-10 V OPERATION
Only Quasar standard white light models can be 1-10V (current sink) dimmed as detailed in the
Programmable Function Table in the preceding section and in the following sections.
NOTE:
• For all 1-10v current sink dimming the luminaire must be set to 1-10V in the Control Mode sub
menu.
• Dimming control at min. will give approximately 10% light output – it will not dim down to zero.
MENU
> >
SCROLL UP
/
DOWN
> >
SELECT
Control Mode 1-10V
Chan
No.
Function Applicable to Model
0-10V Value
(DC Volts)
Desired Effect
01 LED Dimming Standard White Light 1-10 Min. (10%) to max. light output
1 CHANNEL 1-10V DIMMING STANDARD WHITE LIGHT
MASTER / SLAVE OPERATION
All Quasar models in the range can be Master Slave DMX controlled as detailed in the
Programmable Function Table in the preceding section and in the following sections.
NOTE:
• For all Master operation modes the luminaire selected must be set to Master in the Control
Mode sub menu.
• For all Slave operation modes the luminaires selected must be set to DMX in the Control Mode
sub menu and the DMX Slave address must be set using the DMX Address menu to address 001.
• Once the Master and Slaves have been set up as above, the Slaves will follow all the manual
functions of the Master.