UFO Quasar UFOQUA2790-A, Руководство пользователя, Страница: 12 / 28

OPERATION
QUASAR USER GUIDE
12
USER CONTROLS
DECORATIVE MODELS
On power up the display will momentarily display “Universal Fibre Optics” together with the
current model version letter, then the firmware version (example below), then it will go into
initialising whilst it checks the decorative wheel, before displaying the current status of the unit.
The model version code letters displayed momentarily on power up are as follows:
1. W: White Light
2. E: Emergency White Light
3. C: Color Decorative Wheel
4. T: Twinkle Effect Decorative Wheel
Once the luminaire is powered up, user controlled manual functions and all programming
features are available via the four rear panel pushbuttons as detailed in the figure above and
the following table.
IMPORTANT NOTE
: Once programmed the luminaire will always revert to the programmed
settings when power is recycled. However, if manual RESET is selected the luminaire will revert
to factory default settings as detailed below:
White Light Standard & Emergency Dimming 100% /DMX address 001 /Control Mode
Master
Decorative Twinkle Dimming 100% /DMX address 001 /Control Mode
Master / Wheel Speed 0.4rpm
Decorative Color Dimming 100% /DMX address 001 /Control Mode
Master / Select Program PA01 / Program Steptime
5 secs /Wheel Speed 0.4rpm