background image

INTRODUCTION

Thank you for purchasing this UFO light source.

The UFO MicroLED range of light sources utilises an RGBW LED array and is suitable
for use with either glass or PMMA fibre optic harness.

MicroLED light sources require a 100-240V AC power connection to power the PSU or driver.

To ensure that the light source is set up optimally and gives a long service life, please read this
user guide before installing, operating or performing any maintenance on the unit.

This light source is suitable for indoor use only unless it is situated in a weatherproof enclosure.

MODELS COVERED BY THIS USER GUIDE

UFO MIC 1000P

IMPORTANT

This product must be installed in accordance with the applicable installation code, by a person
familiar with the construction and operation of the product, and the hazards involved.

These light sources are not mains dimmable.

The LED array in this light source is not replaceable. When it reaches end of life the whole unit
must be replaced. 

Type Y Attachment: 

If the external flexible cable or cord of this luminaire or associated

PSU/driver is damaged. It shall be exclusively replaced by the manufacturer or his service agent
or a similar qualified person to avoid a hazard.

Location: 

Do not locate this light source closer than 200mm from any flammable surface.

Clearance / Ventilation: 

It is imperative that a gap of 200mm is left around the unit. This is to

allow air to circulate and prevent overheating. The location must have free ventilation and must
not have an ambient temperature higher than that specified for the luminaire.

Mounting: 

This is a fixed luminaire. See mounting plate instructions  on page 3 for fixing to a

surface.

Warning: 

Never look directly into the luminaire LED light source.

Warning: 

The luminaire should be positioned so that prolonged staring into the

luminaire at a distance closer than 0.33m is not expected.

2

MICROLED

1000P

USER GUIDE

Содержание MicroLED 1000P









Отзывы: