Universal Fiber Optics
3
INSTALLATION INSTRUCTIONS
POWER SUPPLY REQUIREMENTS
The LED Illuminator is powered from a multifunction, multi-voltage, desk top Power
Supply Unit. Remove the SW4047B Desk Top PSU from its box. This PSU is a multi-
plug device catering for UK, European and USA plugs.
Select the correct plug and slide it into the receptacle until it clicks securely into
place as shown below:
The plug can be removed by squeezing together the plastic retaining lugs and
sliding the plug back out.
Connect the jack plug into the socket in the back, and the illuminator is now ready
for connection.
DO NOT FIT BATTERIES
TO THE REMOTE
CONTROL UNTIL YOU
HAVE FULLY READ THE
INSTRUCTIONS ON
PAGE 4
