Mic100PT V2 Light Source
INTRODUCTION
Thank you for purchasing this UFO light source.
Please read these instructions fully before connecting your unit to the electrical
supply, and keep them for future reference.
The UFO MIC100PD utilises a white light array with twinkle wheel and is suitable for
use with either glass or polymer fibre-optic harnesses.
This MicroLED is powered by a 100-240VAC PSU or LED Driver.
We do not recommend that the light source be left on for 24 hours a day, 7 days a
week as LED life will be impaired. A switch off of 30mins per day is recommended.
The UFO MIC100PD white light array is available in three target colour temperatures:
UFO Mic100PD-3: warm white (3000K)
UFO Mic100PD-4: neutral white (4000K)
UFO Mic100PD-6: cool white (6000K)
IMPORTANT
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
2
TYPE Y ATTACHMENT: If the external flexible cable or cord of this luminaire or associated
PSU/driver is damaged. It shall be exclusively replaced by the manufacturer or his service
agent or a similar qualified person to avoid a hazard.
LOCATION: Do not locate this luminaire closer than 200mm from any flammable surface.
CLEARANCE/VENTILATION: It is imperative that a gap of 200mm is left around the unit. This is
to allow air to circulate and prevent overheating. The location must have free ventilation and
must not have a ambient temperature higher than that specified for the luminaire.
MOUNTING: This is a fixed luminaire. See separate mounting plate instructions for fixing to
surface.
WARNING: Never look directly into the Luminaire LED light source.
IMPORTANT: The luminaire should be positioned so that prolonged staring into the luminaire
at a distance closer than 0.33 m is not expected.
