UFO Luna CM, Руководство пользователя

Страница: 7 / 16

USING THE ILLUMINATOR
-
LUNA CDMX AND TDMX MODELS ONLY
To set the DMX address, switch off power to the illuminator and remove the top cover to access
the dip switch on the PCB as shown below. Set the address as detailed below and replace the
top cover. Connect up the illuminators with the PSU & remote DMX controller using the Mini XLR
sockets provided on the back of the illuminator - it doesn’t matter which socket is used.
SETTING THE DMX ADDRESS
Switch 10 must be switched
off for DMX operation. Set the
DMX address using switches
1 - 9.
DMX B
Start
Ch #
Dip
Switches
On
DMX B
Start
Ch #
Dip
Switches
On
1 1 11 1,2,4
2 2 12 3,4
3 1,2 13 1,3,4
4 3 14 2,3,4
5 1,3 15 1,2,3,4
6 2,3 16 5
7 1,2,3 : :
8 4 : :
9 1,4 : ;
10 2,4 511
1,2,3,4,5,
6,7,8,9
Model Descrip ti on
UFO Luna CDMX DMX dimming and color wheel speed control
UFO Luna CDMXs
DMX dimming and color wheel speed control with sensor on the wheel al ­
lowing individual color selec ti on
UFO Luna TDMX DMX dimming and con ti nuous twinkle wheel speed control
OPERATION
7
UFO LIGHTING