UFO Luna CM, Руководство пользователя

Страница: 3 / 16

ATTACH THE ILLUMINATOR TO ITS MOUNTING PLATE
Fit the metal mounting plate to the base of the illuminator before making electrical
connections.
Remove the mounting plate and the four M3 10mm screws from the box. Invert the illuminator
and remove the four screws securing the rubber feet.
Leaving the rubber feet in place, align the plate against the feet and secure the plate to the illu-
minator with the four M3 10mm screws using an M3 pozidrive screwdriver.
Do not overtighten. The illuminator can now be fixed securely to the mounting surface.
The illuminator is powered from a 24V DC PSU/Constant Voltage SELV LED driver.
The driver caters for UK/European/other mains supplies using the relevant power cord
supplied.
POWER SUPPLY REQUIREMENTS
There are 2 connections required – the fiber port and the mains supply cable. The fiber port
should be connected first. Connect and secure the fiber optic connector into the collar and
secure using the M5 locking screw.
Connect the PSU to the DC input jack socket on the illuminator, and connect the IEC plug to the
PSU. Plug the mains plug into the electrical supply socket. Switch on power the led Indicator
will illuminate and the illuminator is ready for use. If no light is produced consult the
TROUBLESHOOTING section of this user guide.
CONNECTION
-
LUNA CM
,
MCM
,
TM AND MTM MODELS ONLY
LUNA DMX
/ 0-10
V LUNA MCM
/
MTM LUNA CM
/
TM
INSTALLATION
3
UFO LIGHTING