UFO Luna C 0-10V / UFO, Руководство пользователя

Страница: 9 / 16

NOTES ON POWERING UP THE LUNA CDMX ILLUMINATOR
To revert a DMX only illuminator to normal manual operation of the wheel and the light output,
remove top cover to access the dip switch on the PCB. Set switches 1 to 9 off and switch 10 on, as
detailed below. You must also ensure that the wire links are fitted as detailed below.
REVERTING A DMX ILLUMINATOR TO MANUAL OPERATION MODE
1. If internal DIP switch 10 is OFF, the wheel will find its reference point and stop on color 1 (white).
2. If internal DIP switch 10 is ON, the wheel will find its reference point then rotate continuously
counter clockwise at 7.5 rpm. If internal DIP switch 10 is then switched OFF without powering down
the wheel will continue rotating until power is recycled. The wheel will then revert to the status
detailed in 1. above.
LUNA TDMX TWINKLE WHEEL
Dip switch 10 must be on
for manual operation
For manual operation to work there
must be wire links fitted to the screw
terminals on the PCB between 10V &
DM and 10V & SPD as detailed,
left.
Channel Func ti on Value Descrip ti on
1 Dimming 0 ­ 255 From o ff at 0 to brightest at 255
2 Motor control 0 ­ 255 From 0.6rpm at 0 to fastest at 255 (3 ­ 4 rpm)
OPERATION
9
UFO LIGHTING