UFO LC20EN Flora, Руководство пользователя и сертификат гарантии

Страница: 31 / 40

11
CAUTION!
“PRG” function only operates if the appliance is in “On” position. It
doesn’t operate when switched to “Off” position. If you want UFO CONVECTOR to
operate during the programmed time, you should leave it in “On” position.
If the “ON TIME” and “TIME OFF” are set to same hour, the appliance operates for
24 hours according to the temperature which is set while programming the timer.
The factory setting for “ON TIME” is 00:01 and “TIME OFF” is 00:00.
Repeat the programming instructions as described above if you want to
change the On-Off timer settings.
To cancel the “PRG” function and return to the manual settings, touch
the “Arrow” button when the appliance is in “On” position. “PRG” icon
disappears and manual setting becomes valid.
c. Antifrost Function
In very cold climates, the ambient temperature may fall to critical degrees
which can be harmful for both living beings and goods. To prevent this,
UFO CONVECTOR has Antifrost function which detects temperatures
below 5 ºC (41 ºF) and starts heating automatically thus keeping the room
temperature above critical degrees.
To activate the “Antifrost” function, touch the “snow” button when the
appliance is in “on” position.
“Snow” icon appears on the LCD screen indicating that the
function is activated.
In order to cancel the “Antifrost” function, simply touch the “snow” button
again. “Snow” icon will disappear.
CAUTION!
“Antifrost” does not work in “standby” mode. Make sure that
your appliance is in “On” position if you want to use this function.
If “Antifrost” is activated while the appliance is working at “PRG” mode,
your appliance starts heating when ambient temperature is below 5 °C
during the time other than the programmed time intervals.
CAUTION!
When this function is activated in “Manual” mode, your appliance
does not heat if the temperature is over 5 °C. You should cancel the function to
increase the room temperature.
d. Ionizer
UFO CONVECTOR contributes to your health by cleaning the air with the help of
its “Ionizer” function.
Touch the “Ion” button while your appliance is in “On” position.
“Ion” icon appears on the LCD screen indicating that the function is activated.
To cancel the function, touch the “Ion” button again and the icon on the screen will
disappear.