CUBE
REMOTE
CONTROL
UNIT
Descrip
ti
on
Details
Comments
Power
2 x AAA ba
tt
eries
Range
30 metres
Measured in free space, may be a
tt
enuated by
obstruc
ti
ons or other RF devices
Frequency
2.4GHz
Approved for use in UK, USA and Europe
With the illuminator powered up as described
above, remove the rear cover on the remote control
unit. Taking care not to touch any of the front
buttons, insert the batteries.
If you touch the remote control buttons when
inserting the batteries it WILL effect the operation of
your remote control. If you do accidentally touch any
of the buttons, remove the batteries and start again.
Once the batteries are inserted do not use the
remote control for 3 seconds.
BATTERIES
The remote control unit is matched with the illuminator at the factory.
If the remote control is not matched or an additional or replacement remote control is required
carry out the “Matching Remote to Light Source” instructions as detailed later in this guide.
If a remote control is to be removed from control of a illuminator carry out the “Unmatching
Remote to Light Source” instructions as detailed later in this guide.
FURTHER
INFORMATION
OPERATION
CUBE
USER
GUIDE
6
Содержание Cube DMX
Страница 10: ...PROGRAMMING OPERATION CUBE USER GUIDE 10...
Страница 11: ...PROGRAMMING OPERATION 11 UFO LIGHTING...