05/2008
Vario-Stripper SILENT ,
Artikel-Nr. 038764
Fu
10
1.0 Technical Data
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . .230 V (115V)
Power consumption . . . . . . . . . . . . . . . . . . . .750 W, 4 A (14A)
Power motor drive . . . . . . . . . . . . . . . . . . . .900 W, 4,9 A (8,2A)
Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,5 to 16 m/min
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . .70 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . . . .83 dB(A)
Hand/Arm-Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 m/s
2
Weight:
Basic device . . . . . . . . . . . . . . . . . . . . . . . . . .77 kg
Additional weight . . . . . . . . . . . . . . . . . . . . . . .30 kg
3.0 Safety instructions
Disconnect the power supply before any maintenance is carried
out.Use only recommended blades and ensure it is sharp before
starting.
Maintenance should be undertaken only by qualified personnel.
Use only genuine Wolff spare parts.
Transport
To transport the machine, the handle and additional weights can
be dismantled easily. The weight without handle and additional
weights is 62 kg (see Chapter 5.0 + 5.5).
3.1 Introduction
This operating manual should be used to get the most benefit
from your Vario-Stripper SILENT.
Following these instructions will both extend the life of your
machine and reduce repair costs. Please ensure any user of the
machine is fully familiar with the instructions for use before
allowing work to start.
3.2 Danger while working with the machine
The Vario-Stripper SILENT is designed to the highest technical
standards. Incorrect use can be dangerous!
Disturbances that could impair safety, have to be eliminated at
once.
Comes with
Vario-Stripper SILENT
Blade kit
Tool kit
Additional weight
Safety gloves
Conveyer belt
Operation manual
Use this machine only
as instructed in this operating manual
with the machine in perfect working order.
2.0
Declaration of conformity
We declare under our sole responsibility that this product is
in conformity with the following standards of standardization
documents: EN 50144, according to the provisions of the
Directives 2006/42/EC.
Vaihingen/Enz, 01.03.2010
Dipl.-Ing. (FH) Dieter Hammel
Konstruktionsleitung
i.V.
WOLFF | Eine Marke der Uzin Utz Gruppe | D-71665 Vaihingen/Enz | Dieselstraße 19
