Uflex Velair i10 VSD SMART, Инструкция по установке и эксплуатации

Страница: 27 / 32

27
InSTALLATIOn
4�2�9 Brightness reduction
To reduce the display brightness
–
press the key for 5 seconds
The text appearing on the display.
–
press the key to decrease the value, wait 20
seconds
After 20 seconds from the last action the panel bright-
ness will be reduced to increase the comfort during
night use. On the display will appear only the room
temperature.
4�2�10 Deactivation
To deactivate the display
–
press the key for about 2 seconds
All the light signals go off.
4�2�11 Roomtemperatureprobeoffset
adjustment
To adjust the room temperature probe offset
–
from display off, press the key for about 5 sec-
onds
Access to the variation menu of the AIR probe offset
displayed on the display.
–
operate the keys to decrease or increase
the desired value
The displayed value change.
Use this adjustment carefully.
This adjustment must be carried out only after having
found actual deviations from the room temperature us-
ing a reliable tool.
Adjust to correct room temperature in steps of 0,5 °C.
After 20 seconds from the last action the control goes
out and the settings is memorized.
4�3 Warnings
Long period shut-down
For seasonal shutdowns or for long periods:
– disable the device
– set the main system switch to Off