26
InSTALLATIOn
Down key
Up key
Allows switching between heating and cooling
functions
Allows activating or putting the device in stand-
by
The ventilation speed will be adjusted automati
-
cally between a minimum and a maximum value
The ventilation speed will be reduced and the set
temperature will be changed automatically
The ventilation speed will be limited to a maxi-
mum contained value
Allows setting the maximum ventilation speed
4�1�4 General start-up
Before the activation:
Make sure that the remote control is connected to the
mains.
In case of a master switch on the power supply line,
switch on the system by inserting the switch.
To activate the device
–
press the key
The symbol lights up.
4�2 Main functions
4�2�1 Operating mode set-up
to switch the operating mode
–
press the key for about 2 seconds
The symbol on indicates the Heating function
enable
The symbol on indicate the Cooling function en-
able
In heating function the symbols is alight with setpoint
higher than the room temperature.
In cooling function the symbols is alight with setpoint
lower than the room temperature.
4�2�2 Put in stand-by the control
To put in stand-by the control
–
press the key for about 2 seconds
The control goes out.
4�2�3 Set room temperature
To set-up the temperature
–
operate the keys to decrease or increase
the desired value
The displayed value change.
The room temperature set-point can range between 16
and 31 °C.
4�2�4 Automatic operation
To select the Automatic function
–
press the
key for about 2 seconds
The symbol on indicates the Automatic function
enable.
The ventilation speed is automatically adjusted between
a minimum value and a maximum value based on an al-
gorithm type PI, according to the actual distance from
the room temperature set-point.
4�2�5 Medium speed ventilation function
To select the Silent operation
–
press the key for about 2 seconds
The symbol on indicates the Medium speed func-
tion enable
The ventilation speed is limited at a more reduced me-
dium value.
4�2�6 Minimum speed ventilation
function
To select the Night function
–
press the key for about 2 seconds
The symbol on indicates the Minimum speed
function enable
The ventilation speed is limited at a very low value.
4�2�7 Maximum speed ventilation
function
To select the operation at the maximum ventila-
tion speed
–
press the key for about 2 seconds
The symbol on indicates the Maximum speed
function enable
Maximum power output is immediately obtained both
in heating and cooling.
4�2�8 Set the key lock
To set-up the key locking
–
press both keys for 2 seconds
The text appearing on the display.
All settings are inhibited by the user.
Repeat the sequence to unlock the control.
Содержание Velair i10 VSD SMART
Страница 31: ...31 NOTE...
