UFESA RD1500A, Инструкция по эксплуатации, Страница: 18 / 52

18
technical support service. In order to prevent any risk of danger, do not open the device. Only qualified technical
personnel from the brand´s Official technical support service may carry out repairs or procedures on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the non-
observance of these warnings.
INSTALLATION
Your appliance shall be used as portable appliance only (thanks to respect all the safety warnings given below)
Put the heater on a flat, dry and clean surface.
Install the standing feet with wheels provided with product.
Warning: Always use your appliance with rollers fixed.
INSTRUCTIONS FOR USE
1. Plug the appliance to socket. Please verify the rated current of the power socket whether it fits the requirements
and equipped with a safety grounding device; otherwise, replace the socket.
2. Turn the thermostat knob clockwise to the MAX position
3. To start the heater, turn the switch to set the power select Low power ( I ), Medium power ( II ), High power ( III ).
Note: When the expected temperature reaches, turn the thermostat knob back slowly until you hear a click (Now the
expected temperature is reached. The heater will automatically switch on and off to maintain the setting temperature.)
If you want a higher or lower temperature, turn the thermostat control knob either clockwise or anticlockwise.
4. To turn off the heater, set the power switch to the “0” position and remove plug from the mains socket.
Information requirements for electric local space heaters
MODEL IDENTIFIER(S): RD1500A
Item
Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage local space heaters only
(select one)
Nominal heat output P nom 1.5 KW manual heat charge control, with integrated thermostat No
Minimum heat output
(indicative)
P min 0.6 KW manual heat charge control with room and/or outdoor
temperature feedback
No
Maximum continuous
heat output
P max,c 1.5 KW electronic heat charge control with room and/or outdoor
temperature feedback
No
Auxiliary electricity
consumption
fan assisted heat output No
At nominal heat
output
el max 1.462 KW Type of heat output/room temperature control (select one)
At minimum heat
output
el min 0.564 KW single stage heat output and no room temperature control No
In standby mode el SB N/A KW Two or more manual stages, no room temperature control No
with mechanic thermostat room temperature control Yes