UFESA CU2000T, Инструкция по эксплуатации

Страница: 14 / 44

14
technical support service. In order to prevent any risk of danger, do not open the device. Only qualified technical
personnel from the brand´s Official technical support service may carry out repairs or procedures on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the non-
observance of these warnings.
INSTALLATION
Put the heater on a flat, dry and clean surface. Install the rollers as shown on the below drawing.
INSTRUCTIONS FOR USE
- Plug the appliance to AC 220-240V 50-60Hz socket. If you are not sure, we advise you to contact a
professional electrician for more details.
- To start the heater, choose power like below:
- Set the temperature with the thermostat
- To stop the heater, turn the switch to the position “0”.
- Unplug the product when it’s not in use
Information requirements for electric local space heaters
MODEL IDENTIFIER(S): CU2000T
Item
Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage local space heaters only
Nominal heat output P nom 2.0 KW Manual heat charge control, with integrated thermostat No
Minimum heat output
(indicative)
P min 0,9 KW Manual heat charge control with room and/or outdoor
temperature feedback
No
Maximum continuous
heat output
P max,c 2.0 KW Electronic heat charge control with room and/or outdoor
temperature feedback
No
Auxiliary electricity
consumption
Fan assisted heat output No