●
Check the suction hose, the tubes and the nozzles
– remove the dirt from the inside.
●
Do not vacuum fine dust such as: flour, cement,
gypsum, toners for printers and copy machines etc.
●
It is forbidden to cover up the air holes of the
vacuum cleaner while it is working. Otherwise, the
hot air has no way of exiting the vacuum cleaner,
and this may lead to motor overheating causing
a failure or a deformation of the plastic parts.
●
discharge the device by touching metal items in the
room with the pipe,
●
increase air humidity in the room,
●
use widely available antistatic agents.
Appliance elements
1
Outlet filter cover
2
Suction brush fastening clip
3
Plug and cord
4
“CYCLONE” dust container release lever
5
ON/OFF button
6
Suction power slider
7
Cord rewind button
8
Handle
9
Slider – mechanical regulator of the suction power
10
Suction hose
11
Telescopic suction tube
12
Outlet filter “Microfilter” (fitted inside the vacuum)
13
Basic EPA E11 filter (fitted inside “CYCLONE” dust
container)
14
“CYCLONE” cartridge
15
“CYCLONE” module
16
“CYCLONE” dust container (vacuum’s removable
module)
17
Upper lid of the “CYCLONE” dust container
18
Bottom lid of the “CYCLONE” dust container
19
Combination suction brush
20
Crevice nozzle
21
Small brush
22
Small nozzle
23
Brush Natural Bristle “BNB”
(for cleaning and polishing hard, scratch-sensitive
surfaces, such as wooden floors, panels, parquet,
marble, tiles, etc.; delicate and soft natural bristle
ensures maximum effectiveness of vacuuming and
protects the surfaces cleaned against scratching).
Preparing vacuum cleaner for
operation
1
Press the side button on the end of the suction hose.
2
Place the end of the suction hose in the vacuum
cleaner. You should hear a distinctive click, if you do it
right.
A
B
SUGGESTION
Information on the product
and suggestions for its use
●
This appliance is intended for domestic use only.
●
Operate the appliance only in indoor spaces and
vacuum only dry surfaces. Before vacuuming dry
the carpets that were wet cleaned.
●
Vacuum cleaner is a universal device with
a switchable sucking brush nozzle, which is used
for vacuuming hard floors and carpets.
Technical parameters
The type of the vacuum cleaner and the technical
parameters are indicated on the rating label. Mains
protection 16 A.
Does not cause interferences with audio/video devices.
The device meets the requirements of Commission
Regulation (EU) No. 666/2013 on implementing
the Directive of the European Parliament and of the
Council 2009/125/EC with regard to eco-design
requirements for vacuum cleaners.
The device complies with the requirements of the
Commission Delegated Regulation (EU) No. 665/2013
supplementing Directive of the European Parliament
and of the Council 2010/30/EU with regard to energy
labelling of vacuum cleaners.
Noise level: 80 dB(A).
Static electricity
In the process of vacuuming of some surfaces in areas
of low air humidity the device may become electrically
charged. It is a natural phenomenon – it does not
damage the device, and it is not considered to be a fault.
In order to minimize the phenomenon, we recommend
you to:
Содержание aspirador sin bolsa
