UFESA AS3016E, Инструкция по эксплуатации

Страница: 11 / 34

Examples of problems while operating
the vacuum cleaner
PROBLEM ACTION
The vacuum
cleaner has
turned off during
operation –
thermal fuse was
activated.
Do not install the
“CYKLON” dust
container until the
vacuum cleaner
cools off.
● Turn off the vacuum
cleaner, unplug it and wait ca.
40n minutes before turning it
on again.
● Remove, empty and clean
the “CYKLON” dust container,
as well as the inlet filter cone
and the EPA inlet filter.
● Check and clean
accessories: suction hose,
tubes, nozzles and brushes.
●
Reassembly all the parts
and turn the vacuum cleaner
on.
● If the thermal fuse is
activated too often or the
vacuum cleaner will not turn
on after cooling, the vacuum
cleaner should be repaired
by a professional in a service
center.
The vacuum
cleaner works
poorly.
Remove, empty and clean
the “CYKLON” dust container,
replace filters, check the
suction hose, tube and the
nozzle – remove the cause of
clogging.
The electrical
installation fuse
went out.
Check if other appliances
are not plugged to the same
electrical circuit as the vacuum
cleaner. If the fuse goes out
repeatedly, return the vacuum
cleaner to a service point.
The vacuum
cleaner does
not operate;
the housing or the
cord is damaged.
Return the vacuum cleaner to
a service point.
Advice on disposal
Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
This product complies with EU Directive
2002/96/EC. The crossed wheelie bin
symbol shown on the appliance indicates that
when it comes to dispose of the product it
must not be included in with household refuse. It must
be taken to a special refuse collection point for electric
and electronic appliances or returned to the distributor
when purchasing a similar appliance. Under current
refuse disposal regulations, users who fail to take
discarded appliances to special refuse collection points
may be penalised. Correct disposal of discarded
appliances means that they can be recycled and
processed ecologically, helping the environment and
allowing materials used in the product to be reused.
For more information on available waste disposal
schemes contact your local refuse service or the shop
where the product was purchased. Manufacturers and
importers are responsible for ecological recycling,
processing and disposal of products, whether directly
or via a public system.
Your local town council can provide you with information
about how to dispose of obsolete appliances.
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his rights to modify the product any
time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.