Filter Replacement
1. Replace Filter: Unscrew sensor tip as
shown to replace filter. Replace filter
whenever it becomes visibly dirty or every
2 to 3 months depending on use.
Sensor Replacement
1) Remove sensor by unscrewing sensor tip
and pulling out the socket.
2) Install the new sensor by aligning the
mark on the sensor cover with that on the
probe and pressing together.
WARNING
DO NOT TWIST OR FORCE THE
SENSOR INTO THE SOCKET.
Misalignment can damage the sensor pins.
Replace w/
New Filter
Remove
Old (Dirty) Filter
Unscrew
Sensor Tip
Unscrew
Sensor Tip
Filter
Pull Straight Apart
DO NOT TWIST!
Screw On
Sensor Tip
Filter
Push Straight Together
DO NOT TWIST!
DO NOT TWIST
!
Align New Sensor With Tip
And Push Straight On.
SPECIFICATIONS
Cross Sensitivity to Automotive Chemicals
Some Automotive solvents and chemicals
have similar hydrocarbon properties as R134a
and may elicit a positive response (< 30 seconds)
from the RLD15B. Before leak detecting, clean
up any chemicals in the list below that elicit a
response.
Rain-X
®
Windshield wash fluid
Ford
®
silicone lubricant
Ford
®
Gasket adhesive (when wet)
Ford
®
rust inhibitor (when wet)
Loctite
®
Natural Blue
®
Degreaser (undiluted)
Ford
®
brake parts cleaner (when wet)
Ford
®
silicone rubber (when uncured)
Motorcraft
®
antifreeze heated to 160˚F
Gunk
®
liquid wrench (when wet)
Ford
®
spot remover (when wet)
Ford
®
pumice lotion (with mineral solvent)
Ford
®
motorcraft brake fluid
Ford
®
carburetor cleaner (when wet)
Third party trademarks referenced are the property
of their respective owners.
Sensitivity
.05 oz/yr R134a
.025 oz/yr R22, R1234yf
Sensor Life
> 300 Hours
Response Time
≤ 1sec
Power Supply
4 (AA) Alkaline
Battery Life
4 - 6 Hrs. Continuous
Warm-Up Time
<20 Seconds
Probe Length
17 inches
Numerical Display
7 Segment Digital (1-9)
Display Refresh Rate
3/sec.
Operating Temperature -24 to 125˚F (-31 to 52˚C)
Operating Humidity
<95% non. condensing
Operating Altitude
<10,000 ft.
Storage Temperature
-4 to 122˚F (20 to 50˚C)
Pollution Degree
4
Weight, lbs
1.5 Lbs
Certifications
SAE J2791, SAE J2913
(A2L certified)
EN14624-2012
ASHRAE 173-2012
Warranty
2-Year limited warranty
