UEi PowerDAQ PD2-AO Series Скачать руководство пользователя страница 67

Страница: 67 / 69

Appendix D: Warranty

United Electronics, Industries, inc. warrants that the products

furnished under this agreement will be free from material defects
for a period of one year from the date of shipment. The customer

shall provide notice to United Electronics Industries of such defect
within one week after the Customer’s discovery of such defect.

The sole obligation and liability of Untied Electronic Industries
under this warranty shall be to repair or replace, at its option,

without cost to the Customer, the product or part which is so
defective and as to which such notice is given.

Upon request by United Electronics Industries, the product or part
claimed to be defective shall immediately be returned at the

customer’s expense to United Electronics Industries.

There shall be no warranty or liability for any products or parts

which have been subject to misuses, accident, negligence, failure
or electrical power or modification by the Customer without

United Electronics Industries’ approval. Final determination of
warranty eligibility shall be made by United Electronics Industries.

If a warranty claim is considered invalid for any reason, the
Customer will be charged for services performed and expenses

incurred by United Electronics Industries in handling and shipping
the return item.

As to replacement parts supplied or repairs made during the
original warranty period, the warranty period of the replacement

or repaired part shall terminate with the termination of the
warranty period with respect to the original product or part.

THE FOREGOING WARRANTY CONSTITUTES UNTIED ELECTRONICS
INDUSTRIES SOLE LIABILITY AND THE CUSTOMER’S SOLE REMEDT

WITH RESPECT TO THE PRODUCTS AND IS IN LIEU OF ALL OTHER
WARRANTIES. LIABILITIES AND REMEDIES, EXCEPT AS THUS

PROVIDED, UNITED ELECTRONIC INDUSTRIES DISCLAIMS ALL
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.

Содержание PowerDAQ PD2-AO Series






































































Результаты поиска

Содержание PowerDAQ PD2-AO Series

Отзывы:

Бренды по названию

Популярные бренды

UEi PowerDAQ PD2-AO Series, Руководство пользователя

Результаты поиска

Содержание PowerDAQ PD2-AO Series

Отзывы:

Бренды по названию

Популярные бренды