ELECTROMAGNETIC COMPATIBILITY
European Council Directive 89/336/EEC requires electronic equipment not to generate
electromagnetic disturbances exceeding defined levels and have adequate immunity
levels for normal operation. Specific standards applicable to this printer are stated below.
As there are electrical products in use pre-dating this Directive, they may emit excess
electromagnetic radiation levels and, occasionally, it may be appropriate to check the
printer before use by:
Use the normal start up sequence in the location where the printer will be used.
Switch on all localized electrical equipment capable of causing interference.
Check all readings are as expected. A level of disturbance is acceptable
If not acceptable, adjust the printer’s position to minimize interference or switch
off, if possible, the offending equipment during your test.
At the time of writing this manual (May 2016) UEi Test Instruments is not aware of any field
based situation where such interference has occurred and this advice is only given to
satisfy the requirements of the Directive.
Please Note:
Batteries used in this instrument should be disposed of in accordance with current
legislation and local guidelines.
At the end of the product’s life it should be re-cycled in accordance with current
legislation and local guidelines.
www.ueitest.com
Email: [email protected]
1-800-547-5740
This product has been tested for compliance with the
following generic standards:
EN 61000-6-3 : 2011
EN 61000-6-1 : 2007
and is certified to be compliant
Specification EC/EMC/KI/KANE IRP-2/1
details the specific test configuration,
performance and conditions of use.
Copyright ©2021 Kane USA Inc. All Rights Reserved.
Содержание IRP-2
Страница 1: ...Infrared Printer IRP 2 Infrared Printer...
