23
REPLACING THE BATTERIES
This meter has been designed for use with both Alkaline or rechargeable Nickel Metal Hydride (NiMH) batteries. No other types are
recommended and will void warranty. The analyzer is supplied with 3 (AA) size NiMH rechargeable batteries. These should be installed
into the instrument.
CAUTION
Take great care when installing the batteries to observe correct polarity. Always check the meter
for operation immediately after installing new batteries.
Using Rechargeable Batteries
The battery charger must only be used when NiMH batteries are fitted. Alkaline batteries are not rechargeable. Attempting to recharge
alkaline batteries may result in damage to the product and create a fire risk.
When changing the batteries, the time and date will need setting.
WARNING
Do not try and charge the unit with Alkaline batteries fitted. Do not mix NiMH cells of different capacities from different
manufacturers, all cells must be identical.
Turn over the analyzer, remove the protective rubber boot and fit 3 “AA” batteries in the battery compartment.
Take great care to
ensure they are fitted with the correct battery polarity.
Replace the battery cover and the protective rubber boot.
Time and Date
When changing the batteries, the time and date will need setting.
Battery Disposal
Always dispose of depleted batteries using approved disposal methods that protect the environment.
Battery Charging
Ensure that you use the correct charger. This unit uses a 5V regulated charger. Ensure the batteries are fitted in the correct manner,
and charge for at least 16 hours. Subsequent charges should be overnight. NiMH batteries may be charged at any time, even for short
periods to conduct testing.
WARNING
Under NO circumstances should you expose batteries to extreme heat or fire as they may explode and cause injury. Always dispose of
old batteries promptly in a manner consistent with local disposal regulations.
ANNUAL RECERTIFICATION
What You Get
Calibration (or sensor replacement)
30-point inspection by factory trained professionals
Firmware and software updates
Certificate of calibration
Another 12-month warranty on the analyzer
Return unit freight paid – within continental US and Canada
List of work performed, and parts replaced
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
