17
6. PRINTING INFORMATION - OPTIONAL EXTRA ONLY
Supplied as an accessory for the analyzer is an infra-red thermal printer. Read the manual supplied with the
printer prior to operation. Connections to the analyzer are detailed below:
•
Infrared thermal printer
- this does not require a cable to transmit the data but uses an
infra-red (IR) link similar to a TV remote control. The IR emitter is positioned on the top of the
Analyzer and the bottom of the printer. Ensure they are pointing at each other and within
300 mm, with no obstructions in the way. Data may be lost if transmission is interrupted,
a black square is evidence of this. Keep the Analyzer pointing at the printer until the printout
has finished.
Data can either be printed from a ‘live’ test or from stored data. Printing of stored data is detailed in
STORING AND RETRIEVING DATA.
6.1 Printing a Live Test
During a vehicle test the Analyzer will print data on request. With the analyzer showing the MAIN DISPLAY
press and hold until the second beep. Current data will be sent to the printer. If the print button is held
until the third beep, the test results will be printed in duplicate (from software version 4.6).
The display will show the following until data transmission is complete.
6.2 Standard Printout
The standard printout is shown below :
****PRINTING****
UEI
1-503-644-8723
VEHICLE:
T123 ABC
FUEL:
GASOLINE
DATE: 17-03-99
TIME: 09-10-31
CO % VOL . . .
3.5
HC PPM VOL . . .
1234
CO2 % VOL . . .
14
O2 % VOL . . .
2.1
LAMBDA . . .
1.010
NOX PPM VOL . . .
N/F
