Step 3.
Find the number of the Wireless Bridge CPE digital display tube. For
example, the number is 1 and the CEP is the A master bridge, then the IP of
this CPE is 192.168.255.101; if the CPE is the B slave bridge, then the IP
address of the CPE is 192.168.255.201.
（
There is a table corresponding to a
number and IP in the manual
）
Step 4.
Very important step: Modify your computer's IP address, change your
computer's IP address to 192.168.255.xxx(192.168.255.xxx cannot be the
same as the IP of the CPE), make your computer's IP and the bridge's IP
address be on the same network segment so that you can access them.
Please refer to the manual to modify the computer IP address step or Google
searches how to modify the computer IP address, it is very simple.
Step 5.
After you modify your computer's IP address, you open the computer
browser and enter the IP address of the wireless bridge to access. For exam-
ple, enter 192.168.255.101 to access.
Step 6.
Enter the account password "admin/admin" to access, and set after
successful access.
7.1 How to Configure Your PC IP As 192.168.255.xxx:
a. Find the network icon in the lower right corner and click Open Network
and Internet Settings.
07
