6. Digital Display Wireless Bridge Set Up:
6.1 Connection Diagram:
5.2. Receiving Side:
The digital display bridge is simply connected by dialing. After setting Bridge 1
and Bridge 2 to A and B mode, set the two bridges to the same number
（
1,2,3
，
...
，
F
）
through the “reset” button, then the two bridges can be automatically
connected without using a computer for IP setting. The dialing settings are only
connected using a point-to-point bridge, which is not suitable for point-to-multi-
point connections.
04
*It is strongly recommended to pair the wireless bridge in this way.
