UEC DSD 5000, Руководство пользователя

Страница: 20 / 50

20
First Time Installation
Step 2: Time Zone
Similarly use the
NAV
buttons to determine your Australian Time
Zone. Press
OK
button when the correct
Time Zone
is selected.
Step 3: Select USB Storage Device
If you have connected a recording device (hard disk drive externally
attached), you have the option to select it during the
FIRST TIME INSTALLATION
.
See “
External Storage Setup
” on page 37 for further instructions on installing a
storage device.
Step 4: Satellite Channels Search
Finally, the STB needs to search for available channels.
*
Using the
NAV
buttons, select the
SATELLITE CHANNELS SEARCH
option and press the
OK
button.
Once in the
SATELLITE CHANNELS SEARCH
, press the
OK
button again. Your STB will now
automatically search for available satellite channels, this process may take a few minutes.
You will see this icon (loading icon) once the searching process has begun, and the
number of available channels will be calculated.
* It is critical that your satellite dish is installed correctly, and with a single frequency ‘10700’ LNB (via LNB In
port) as recommended by VAST™. See “
Trouble Shooting
” on page 47.