uebe cyclotest 9030, Инструкция по эксплуатации

Страница: 10 / 23

Reading the test result
EN-18
Use with the cyclotest® cycle computers
EN-19
If 2 violet lines (upper check line and
lower test line) appear in the result
window and if the lower line is the
same shade as or darker than the upper
line, you are in your fertile phase.
You may discontinue the test sequence
here and keep the remaining test sticks
for the next cycle.
If 2 violet lines (upper check line and
lower test line) appear in the result
window and if the upper line is much
darker than the lower line, this indi-
cates that the test has been correctly
carried out, but that you have not yet
reached your fertile phase. The same
applies if only one line appears.
In this case, you must carry out further tests
on subsequent days until you obtain a posi-
tive result.
The test is classed as INVALID if no line appears
in the result window. Possible reasons for an
invalid result may be a damaged foil pouch,
incorrect storage or a mistake when perform-
ing the test. In this event, please keep all the
test materials and contact the cyclotest® serv-
ice hotline.
cyclotest® service hotline
+49 (0) 93 42 / 92 40 40
w w w . c y c l o t e s t . d e
After a period of 10 minutes the test result can
no longer be reliably read.
Dispose of the test sticks with your regular
household waste.
If you are using one of the cyclotest® cycle
computers (cyclotest® 2 plus or cyclotest®
baby), you will recognise the start of your
highly fertile phase by the baby symbols in the
display. The cycle computer uses the stored
data to calculate this phase and indicates this
with two baby symbols appearing simultan-
eously in the display.
Display: Highly fertile phase
In order to pinpoint even more accurately
the time of optimum ability to conceive, you
should now use the cyclotest® Ovulation Test.
This test provides reliable indications as to
whether and when ovulation occurs.
If the ovulation hormone has been detected,
enter this information in the cycle computer.
Refer to the notes in your cycle computer’s in-
structions for use.
It is advisable to enter the result in the cycle
computer on the very same day, as your highly
fertile phase usually lasts only between one
and two days.