13
MENU [01] SEND RECORDS
NOTE:
Before downloading data, be sure the Ultraprobe is
connected to the computer via the USB cable.
TO SEND DATA FROM THE ULTRAPROBE TO YOUR COMPUTER
Make sure the Ultraprobe is off.
Click (Press) the Sensitivity dial and hold it in. while you pull/squeeze the trigger. Hold both
the Sensitivity Dial and Trigger in until the screen displays: “MENU [01] Send Records”.
NOTE:
Hold the trigger in during any of the Set Up Mode operations or the instrument will
turn off.
When MENU [01] Send Records is shown, “click” the Sensitivity Control Dial and all the data
will be transferred to the computer.
NOTE:
For software management, refer to Ultratrend DMS
Tm
Instructions.
MENU [02] DELETE RECORDS
TO CLEAR ALL RECORDS IN PREPARATION FOR YOUR NEXT ROUTE, YOU NEED TO
DELETE RECORDS
Enter Setup Mode…be sure to continue to hold the Trigger in.
Spin clockwise to Menu [02] Delete Records
You will see a prompt:
Delete Records Confirm
?
To exit, select NO
Click
Spin / Click
