12
For “Quick” Storage
- see
Set Up Mode
,
“Menu 05; Store Mode”
to change this setting
Firmly “Click” (press) the Sensitivity Dial once and the record is
stored. The Storage Location number will automatically move up to
the next sequential number.
TO OVERWRITE DATA OR TO ENTER DATA IN A NEW
LOCATION
Click (press in) the Sensitivity dial button; the Storage Location number will blink.
Spin the Sensitivity Dial until the desired storage location is displayed on the screen
Click the Sensitivity Dial again and the prompt STORE YES? will appear.
To store the new information in that location, “click” the Sensitivity Dial again and the record
will be over written.
TO DOWNLOAD THE INFORMATION
Refer to Setup Mode, “Menu [01] Send Records”
SETUP MODE
TO ENTER THE SET UP MODE
Make sure the Ultraprobe is off.
Press (Click) the Sensitivity dial and hold it in. while you pull/squeeze the trigger. Hold both the
Sensitivity Dial and Trigger in until the screen displays:
“MENU [01] Send Records”
.
NOTE:
Hold the Trigger in during any of the Set-Up
Mode operations or the instrument will turn off.
Once Menu 01 is displayed, you may move to any of the
other Menu Modes by spinning the Sensitivity Dial up or
down (clockwise or counter clockwise).
When the desired Menu Mode is reached, click (push) the
Sensitivity Control in to enter/use that menu function.
You may spin to enter and exit any Menu mode in the Set-Up
mode as long as the trigger is squeezed to keep the
instrument on.
