UDP Technology NVE40K Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 22

UDP Technology NVE40K Скачать руководство пользователя страница 12

NVE40K Hardware Manual

D

UDP Co., Ltd.

12

1. Unscrew four collar screws.
2. Grasp the inject/eject handle of the blade and push it down as shown in below figure.
3. Remove the blade from the rack.

Figure 8. Ejecting a blade

Inserting a blade

1. Make sure that the inject handle is in the outward position.
2. Insert the blade into the rack.
3. Grasp the inject handle of the blade and pull it up.
4. Screw four collar screws.

3.5. Factory Default Settings

Factory default settings are as follows:

•

IP address: 192.168.xx.yy (refer to 2.3 Serial Number / MAC Address)

•

Mask: 255.255.0.0

•

Gateway: 192.168.0.1

•

User ID: root

•

Password: pass

MAC address = 00-13-23-01-23-45

→

IP address = 192.168.35.69

Factory Default (FD) initialization procedure is as follows:

1. Turn ON the power.
2. Press “Reset” button when Status LED starts blinking rapidly.
3. Release “Reset” button when Status LED blinks slowly.

Convert the Hexadecimal number to Decimal number

«
...
10
11
12
13
14
...
»

Содержание NVE40K























Отзывы:

Нет отзывов