IPN Series
IPN1202HD-5241 Installation Guide
01A.03
UDP Technology Ltd.
9
4.2. Installing the Mounting Adaptor
The provided mounting adaptor is designed for installing an IP camera device on a bracket or
tripod. Tripod screw holes are available on both top and bottom of the camera. Refer to the
following image for instruction.
Note
i
Mounting screws that are longer than 7mm may damage the camera’s inside
parts.
4.3. Connecting Cables
Connect the camera to the network and power by using a LAN cable (not supplied) and DC
power adopter (supplied).
Network Connection
Use the Ethernet cable (RJ45) to connect the device to a hub or router in the network. When
the LAN cable is connected, the orange LED light will become solid and green LED will blink
every 250 millisecond.
LED LED
Green Orange
