VISION
UDOO VISION User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by M.B. Copyright © 2021 SECO S.p.A
9
1.4
Safety
The UDOO VISION board uses only extremely-low voltages.
While handling the board, please use extreme caution to avoid any kind of risk or damages to electronic components.
CE and FCC certification retained using only the UDOO VISION qualified Power Supply Unit. When not using UDOO VISION qualified Power Supply, use 12VDC
(min 36W power) PSUs certified for your country (make sure that the power cable is less than 3 mt. long).
UDOO VISION qualified PSU: XYY-120300U. Input: 100-240VAC 50/60Hz. Output: 12V
DC
3A 48WMax
CE and FCC certifications retained with the board equipped with the UDOO VISION metal case. When not available, it is suggested to use a case with the same
attributes as the UDOO VISION metal Case, sold as an accessory (P/N: KTMC-D02-COV01.00).
1.5
Electrostatic discharges
The UDOO VISION board, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all
the devices and/or components on-board.
This product should be operated in a well-ventilated environment and, if used inside a case, the case should not be covered.
This product should be elevated on a stable, flat, electrically non-conductive surface whilst in operation, and clear from any object that
can induce a short-circuit.
Do not expose it to water, moisture or heat from any source; UDOO VISION is designed for reliable operation at normal ambient room
temperatures.
Avoid handling the warm and moving parts (like the fan) and generally the printed circuit board while it is powered
Whenever handling a UDOO VISION board, ground yourself through an anti-static wrist strap. Placement of the board on an anti-static
surface is also highly recommended. During normal work condition of UDOO VISION board, do not touch the product.
