VISION
UDOO VISION User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by M.B. Copyright © 2021 SECO S.p.A
54
4.3.15.6
GPIO Configurations submenu
4.3.15.7
Arduino ATMEGA32 submenu
4.3.16
M.2 peripheral management submenu
Menu Item
Options
Description
Direction
Input / Output
Configure GPIOx pin as input or output. In case the GPIOx is configured as an output, the default output
value can be configured
Default Output Value
Low / High / Last
To fix the GPIOx starting vale: Last means no changes with respect to the last boot. GPIx shows input x
current value.
Menu Item
Options
Description
Power On Arduino-compatible
Disabled / Enabled
If enabled power on Arduino-compatible
Arduino-compatible Power
Management
Enabled
Disabled
Wake Only
Enable / Disable system poweron and poweroff from Arduino-compatible via I09*, pin 23 on CN4 (see
documentation) :
Disabled = Arduino-compatible will never change power status of the system.
Wake Only = Arduino-compatible will only be able to wake the system form S3/S4/S5
Arduino-compatible reset on power
Disabled / Enabled
If enabled the system will automatically reset the Arduino-compatible when the system is waking from a low
power state (S3/S4/S5)
Menu Item
Options
Description
WiFi on M.2
Disabled / Enabled
Enable Wifi capabilities of a WiFi M.2 Key E Card
Bluetooth on M.2
Disabled / Enabled
Enable Bluetooth capabilities of a BT M.2 Key E Card
WWAN on M.2
Disabled / Enabled
Enable WWAN capabilities of a WWAN M.2 Key B Card
