RFT-868-USB
Release A - 01/09/2015
Copyright 2015 Udoit Srl - All rights are reserved
www.udoit.eu
Figure 3 Software apllication for the RFT-868-USB
After connecting the RFT-868-USB select the proper serial Port and push “
Set
”(see Figure 3).
Pressing “
Local Status
” will show the address number, the Network ID, the Profile (None) and the
firmware version.
3.
Configurations or particular activities may be different for every device which will be
associated, except the learning procedure which will be always the same:
Once the “Learning Status”
3
of
the RFTide device is active, it
can be programmed by defining
a
progr address
number (0
÷253), setting “
No Profile
” and
pushing the PROGR button.
3
Refer to the proper device manual
“Learning procedure”
section.
