RFT-868-USB
Release A - 01/09/2015
Copyright 2015 Udoit Srl - All rights are reserved
www.udoit.eu
II.
SEND_PACKET Message
Referring to Figure 3, on the
“Commands”
section with the
“Send Packet”
field it’s possible to:
•
Send a message with the RFTide command “SEND_PACKET”
in case the acknowledge
from the recipient is required. Retries will be done till an ANSWER_MESSAGE won’t
arrive or even the second attempt results failure.
•
Send a message with the RFTide command “UNIDIRECTIONAL_SEND_PACKET” in
case the acknowledge from the recipient is not required.
The payload of the message is fully editable by filling the fields.
Figure 5 Send Packet Sequences
Depending on the text, this kind of message is multi-purpose:
•
STATUS_REQUEST (for RFT-868-PIR, RFT-868-MAG, RFT-868-RELAY-S).
•
ON-OFF Command (for RFT-868-RELAY-S).
