udir/c UDI009 Скачать руководство пользователя страница 5

05

How to Operate the Boat

To move Forward

Pull back the throttle trigger of the 
transmitter. The boat moves forward.

To move Backward

Push forward the throttle trigger 
of the transmitter. The boat moves 
backwards.

To turn Left

Pull back the throttle trigger of the 
transmitter and move the steering 
knob counterclockwise, then the 
boats turns left.

To turn Right

Pull back the throttle trigger of the 
transmitter and move the steering 
knob clockwise then the boat turns 
right.

Self-Righting Hull

If the boat capsizes, 

Push forward 

and backward the throttle trigger of 
the transmitter and then pull back at 
once. The boat will then return to 
normal, the capsize reset function 
will turn off automatically when the 
boat in low battery.

Trimmer

If the boat drifts to the right, press 
the left rudder trim on the transmitter 
and the boat will gradually correct the 
rudder alignment. It will start moving 
straight.

If the boat drifts to the left, press 
the right rudder trim on the transmitter 
and the boat will gradually correct the
rudder alignment. It will start moving
straight.

Left Rudder Trim

Right Rudder Trim

Содержание UDI009









Отзывы: