04
Transmitter Preparation
Steering Knob
Throttle Trigger
Forward Trim
Backward Trim
Power Indicator
Left Rudder Trim
Right Rudder Trim
Power Switch
Battery installation of transmitter
Open the battery cover of the transmitter
and place the same type of battery with
saturated capacity according to the '+-'
electrode indication in the battery cell.
(battery not included)
Battery Cover
Bottom of Transmitter
4×1.5V
AA, battery
Please make sure the transmitter throttle stick and rudder knob to
normal.
It is recommended to be familiar with the operation on the surface
of the water before long distance navigation.
Sailing Operation
Transmitter connect with Boat
Frequency Pairing
①
Power on the transmitter, will sound “di”, and the indicator light
flashes, then to enter frequency pairing.
②
After the boat battery is installed and powered on, tighten the
hatch cover.
③
Put the boat into the water, the transmitter will sound “didi”,
and the indicator will keep long bright it means frequency pairing
successful.
