Drone calibration
(When abnormal flying)
Tips: When the drone is fiercely impacted or crashed, it may cause the gyro can
not recover and cause difficult control, if so, you can re-pairing&re-calibrate
and put the drone on the level surface.
Unlocking/locking the motor
Note: If the propeller is deformed or damaged, Altitude Hold Mode will fail.
If the atmospheric pressure is instability or Typhoon weather, Altitude Hold
Mode can not work well.
Intelligent flight control system calculates the hovering position, more stable control
feature, makes it easier for beginners to control. Release the stick, the drone will
keep hovering automatically to enable single hand operation.
Low Battery Alarm
Altitude Hold Mode
After successful frequency alignment,
the right stick is pushed to the lower
right corner by 45°, and the drone LED
turns to keep bright after quick flashing,
indicating that the gyroscope has been
calibrated. Release the right stick.
Push the left and right stick inward to the 45 degree angle simultaneously.
①
In standby, unlocked the motor and working.
②
In Working, locked the motor and stop rotating.
When the transmitter in low battery, the transmitter will continues to sound “di-di” to
remind the user to return home and replace the batteries of thetransmitter as soon
as possible.
When the drone in low battery, the drone LED will continue to "flash and stop ",
the drone must return home at this time.
10
