UDIAG BST300 Скачать руководство пользователя страница 6

2.1.10 Battery Test Result

Testing Result Description

Battery test result includes 5 types as following

 

      

NOTE:

 If "Replace" resulted from IN-VEHICLE mode, it might be the reason that vehicle cable is not well 

connected with the battery. Ensure to cut off the cable and retest the battery under OUT-OF-VEHICLE before 

making a decision to replace battery.

After testing, if need to return, press “RETURN” key to directly return to the startup interface. If it is 

"OUT-OF-VEHICLE" test state, press OK key, it will print the test result. If it is "IN-VEHICLE" test state, press OK 

key will bring to Cranking Test.

State of Charging

Measured CCA

State of Health

Voltage

Result

Rated CCA

SOH: 96%      SOC: 98%

12.64V          490A

Rating           500A

   GOOD BATTERY

   Good battery

The battery is without any problem.                

Please be relaxed to use!  

GOOD BATTERY

SOH: 78%      SOC: 30%

12.20V          440A

Rating           500A

   GOOD, RECHARGE

Good, Recharge

Good battery but low current.

Recharge before using.

SOH: 46%      SOC: 80%

12.68V          340A

Rating           500A

   REPLACE

Replace                                 

The battery is near to or already              

reached the end of the using life.                

Replace battery, otherwise, bigger 

danger will be followed.

SOH: 0%       SOC: 20%

10.60V           0A

Rating           500A

  BAD CELL, REPLACE

         Bad Cell, replace

                 Battery interior damaged, broken cell

                 or short circuit, replace battery

SOH: 39%      SOC: 20%

12.08V           310A

Rating           500A

  CHARGE-RETEST

Charge-Retest

Unstable battery shall be recharged

and retested to avoid error. If same

test result appears after recharge

and retest, the battery is regarded 

as damaged. Replace the battery.

6

Содержание BST300









Отзывы: