Drone calibration
(When abnormal flying)
Tips: When the drone is fiercely impacted or crashed, it may cause the gyro can
not recover and cause difficult control, if so, you can re-pairing&re-calibrate
and put the drone on the level surface.
After successful frequency alignment,
the right control lever of the transmitter
is pushed to the lower right corner by
45°, and the status indicator of the
drone turns to keep bright after quick
flashing, indicating that the gyroscope
has been calibrated. Release the right
lever.
Unlocking/locking the motor
Push the left and right stick inward to the 45 degree angle simultaneously.
①
On standby drone, motor rotation, drone nlocked.
②
When the drone is not take off, the motor stops rotating and the drone is locked.
The drone can only take off
when the motor is unlocked.
Note: If the propeller is deformed or damaged, Altitude Hold Mode will fail.
If the atmospheric pressure is instability or Typhoon weather, Altitude Hold
Mode can not work well.
Intelligent flight control system calculates the hovering position, more stable control
feature, makes it easier for beginners to control. Release the stick, the drone will
keep hovering automatically to enable single hand operation and more clearly aerial
photography.
Low Battery Alarm
Altitude Hold Mode
When the transmitter in low battery, the transmitter will beep “di-di” constantly to
remind the user to return home and replace the batteries of thetransmitter as soon
as possible.
When the power of the drone will run out, the drone light will continue to "flash and
stop ".It means that you must return at this time.
10
