Flight Operations
Transmitter connect with Drone
Mobile phone connect with Drone
Frequency Pairing
①
Turn on the power.
②
Pull the left stick to the lowest position and
let go, the light goes off slowly. it indicates
the transmitter enters the frequency state.
③
The drone is placed on the horizontal ground, and long press the power button for 2
seconds to start the machine. After the navigation light is on for 2 seconds, the front
navigation light flashes and the rear navigation light goes out. At the same time, the
remote control emits a prompt sound of "di", indicating successful frequency alignment
and entering the horizontal calibration of compass.
Horizontal ground
Download and install APP: UDIGPS-PRO
This software is suitable for mobile phones in the
IOS 9.0 or later and Android 4.4 or later system.
For detailed operation, please check the system
“HELP” of APP.
6
