①
Switching sequence. At first, turn on the power of the transmitter, then turn on the
power of the drone. After the end, turn off the power of the drone first, and then turn
off the power of the transmitter.
②
Improper operation caused the crash. It is necessary to check and confirm the
connection of the motor, blade or electric pool of the aircraft and the damage degree,
so that the aircraft can fly again. If it is damaged, please replace it with new
accessories, otherwise it will easily cause flight accidents.
③
Battery must be removed when the drone is not in use.
Attention
Disassemble:
Unscrew the screw on both
sides of propeller clamp and
pull out propeller assembly.
Installation:
Place the propeller assembly on the
motor shaft, fix it on the motor, and
lock screws on both sides of the
propeller clamp.
Note: There are marked "A" and "B" on the back of the propeller. Please carefully
check the letters "A" and "B" on the folding arm of the drone. The two letters
must correspond to each other during installation.
A
A
B
B
Parts Replacement
Propeller Replacement
13
